If you have any feedback on our support, please contact tngfb microsoft. Hi Kristin. I'm using Vista SP2. Here is the info from the RDC about page: Shell version 6. Yes, it is still slow after i close and re-open the application usign remoteapp What other things can i check? Thanks again for your suggestions! Lionel thank you for your response, your suggestion 5 improved the performance of TS. The issues does not occurs. After disabling all the re-directions the issue still there.
I made the registry change anyways nut i'm not sure if i had to since step "e" made the difference. These were already disabled. Thanks for your help!!! I am glad to hear that disabling the Large Send Offload has mitigated the perform issue that occurs in your terminal services environment. Root Cause Assessment. Based on my experience and research, the virtual machines encounter this issue more often. Based on series of tests on the network adapters, there was little improvement seen for pure networking activities when the host CPU was more powerful than the network adapter hardware.
In these cases, offloading TCP segmentation to the hardware frees the host CPU from the load of segmentation, allowing it extra cycles to perform more transactions. In such a situation, the disadvantages of disabling the LSO quite depends on your CPU usage and its power rate to the network adapter.
Besides, the network adapter itself also decide part of the result, and for this part, I recommend you to contact the manufacturer of the hardware to get further information. Alternative Solution. In some cases, upgrading the NIC driver resolves the issue, because those manufacturers of the NIC has included the fixes into the driver updates.
Therefore, please try to upgrade your network hardware driver and test the issue again with the LSO enabled. Again, thanks for your cooperation and patience. Please let me know if I can provide any further assistance. Lionel Chen TechNet Subscriber Support in forum If you have any feedback on our support, please contact tngfb microsoft. This is not happening while I am connecting via traditional RDC. I did the above tricks but not works.
Thanks Crew. Wow, almost ten years since this post was answered and still relevant today and resolved my RDP issue. Solved it: e. After doing this, it's snappy and is quick as expected, thank you Lionel Chen! Office Office Exchange Server. Not an IT pro? Windows Server TechCenter. Sign in. United States English. Ask a question. Quick access.
Search related threads. Remove From My Forums. I use a program on it that is graphically intensive, but it was usable up until about yesterday afternoon, when the latency all of a sudden became unacceptable.
The latency is not limited to the program either; even opening the start menu takes 10 s or more. I have changed various RDT settings like the display color depth and the connection speed currently set to modem 56 kbps and have turned off persistent bit cacheing.
It's now better than it was yesterday, when I was losing connection every few minutes, but it's still FAR slower than it has been. It is probably your provider. The internet, in general, is getting crushed right now.
Latency is about 15 times normal even on my DIA connections. Adjusting the quality settings will help with the bandwidth used by the connection but not really the latency, which is more important on an RDP connection. Can you test the latency between your connection and the where your VPN terminates? I would do a few traceroutes and see where the latency is coming from.
If it is on the internet there is likely little anyone will do for you on the ISP side. At least you will know it is from the Internet and not something in your equipment that way. Conversely, if the path between you and the termination point of the VPN is fine, you may start looking at something internal. Whether it be an overloaded VPN concentrator or home router or bad wifi signal etc. Yes No. Sorry this didn't help. Thanks for your feedback.
I have ran the command on both remote Windows 10 Pro pcs. There is no change, the HP pc connects, but then hangs on a black screen and the shows an unresponsive desktop. The Dell remote pc runs fine. I seem to have solved the problem. I have set this to Off and now the remote connection works fine.
Any suggestions please. I have the same question Report abuse. Details required :. Cancel Submit. Hi, My name is Angel. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site.
0コメント