Repeat a to d four more times, changing the numbers in d as appropriate, in order to assign the remaining four codes to buttons 2,3,4,5. DVD button blinks twice. At this stage I was in HDD mode, and did not have a disk in the drive I'm not sure if this is crucial or not. If you want to, you can press 6 on the OFA remote to test if it is indeed controlling the Sony - this should change the channel to 6 ITV2. Don't use 1,2,3,4 or 5 as a test though, as you've reprogrammed those buttons now!
That's it! Next time you turn on the Sony, it should be multi-region To be sure the hack has worked, simply redo step 2 and check that the region is indeed now listed as Note: previous posts have used device code instead of in step 4.
However, this means a little faffing about with changing the "Command Mode" to 1 on the Sony. Also, gives more functionality to the OFA with my Sony Region code posted by tpol, January 07 My thanks to the guys who find these things and espescially to samcruise and Gavan.
FillumBuff Standard Member. Can anyone please help me out at all with this Thank you very much, FillumBuff. Daveiggy Member. However, I have noticed that I have a clock always showing at the lower right of the corner off the TV. PeteZ4 Guest. Hi Guys! First thanks to all for their great posts to make this machine region-free. I bought this old one cheaply from ebay.
The device code will not work with this remote. Result: Enjoy! I've tried Command Mode 3 and 1, programming 2,4,6,8 and 9 to avoid clashing with and , and it just stares blankly at me. The settings remain at: Version: 1. Nicht Gut What else could I try? Oh Joy!! I looked at this thread It works! R1 disks play. Good news.
I have the same firmware as previous poster gavan. This meant that when using the OFA remote I could use the device code of "". So the instructions I used were:- prepare: 1. When the machine was fully on, then 4. Press the "Angle" key then it should now say Region Remember to reset the DVD's commmand mode back to 3 if you wish.
Good luck!!!! I cannot get my rdr hxd bougth in germany - region code 2 codefree in spite of the great instructions posted here. I tried both command modes 1 and 3 , in standby and in power on.
I have especially bought a stylish "One for All Protecto 4". URC what else could I try?? Did you try command mode 2? How about resetting the OFA remote to factory settings in case this was wrong and then start again. Otherwise, just keep trying. Good luck! Sword Active Member. Any ideas whether I can use my harmony to do this hack? Prev 1 2. First Prev 2 of 2 Go to page. Kwozzii Active Member. All I would say is try a region 1 disc before you do anything - I did and mine played it straight out of the box.
Kwozzii said:. Click to expand Must have been Sony then because I got from Littlewoods catalogue and I very much doubt they would do it. Will Guest. Works Perfect. Silverdtvw Active Member. In this post. Does anyone know how to hack the region code using the service remote?
I've managed to upgrade the HDD to 1Tb using it but I can't find the proceedure using the service remote. Couldn't find any mention of it in the service manual either Sony have 2 different models of service remote, the one which i posted here is one for this specific model at present.
The other one i done have as yet, but i beleive that one does have the approriate keys on it to allow it being done. There is another option which requires an interface to be plugged into the rear of the unit and pc the other end, the Gui software allows this to be changed, but unless yoiu know someone with it then there is no chance.
I cant even buy it through my sources. Panasonic or buy a new player that has been pre-modified. Ready-Made Transmitter. Ionic Admin. Hello, is it able to make a sony xm2 region free? Max Wilson. False advertising. How do we unlock? Did you find a solution, I have the same issue I want to fix? Michael Burke. Can I change the region setting?
Have you found the solution?
0コメント